4
1. INTRODUCTION
1.1 Introducing the economy series
Thank you for purchasing the Temp 4/5/6 meter. These microprocessor-based
handheld meters are economical and easy to use. They are available in three
models:
•
The Temp 4 uses *YSI 400 series thermistor temperature sensor
•
The Temp 5 uses 100K thermistor temperature sensor
•
The Temp 6 uses PT100 ohm (Platinum) RTD temperature sensor
All Temp 4/5/6 meter series feature:
•
Large LCD for clear and easy reading
•
Readings
in
o
C and
o
F (selectable)
•
Minimum and maximum temperature display
•
Minimum and maximum hold mode
•
Low battery indicator
•
Hold function, freezes measured reading
•
User calibration - offset adjustment
•
Built-in memory backup; calibration and other information remain if battery
is disconnected
•
Temp 5 meter allows user selection of most suitable temperature curve for
its thermistor sensor
This instruction manual is organized for quick reference with step-by-step
procedures that give you thorough review of the various features and meter
operations.
Included with your meter are a temperature sensor (Temp 5 only), rubber boot,
4 alkaline “AAA” batteries, an instruction manual and a warranty card. To order
other accessories, please refer to Section on Accessories for more information.
* YSI is a registered trademark of Yellow Springs Instruments.
Summary of Contents for Temp 4/5/6
Page 19: ...NOTES...
