Instruction Manual
Temp 4/5/6
8
2.5 Battery
Replacement
A “
LO
” annunciator in the LCD alerts you when battery power is running low.
Replace with the same type as recommended by the manufacturer.
Caution:
Power off the meter when changing battery.
2.6 Connecting the Temperature Sensor
To connect a temperature probe into the meter, align the connector of probe to
the meter’s socket and push fully until it is in position.
Note: Both the Temp 4/5 use phono jacks while the Temp 6 uses a 3-pin
connector with a locking mechanism.
Temp 4/5 Socket
Temp 6 Socket
LO
.
°C
Summary of Contents for Temp 4/5/6
Page 19: ...NOTES...
