OAKLEY AIRWAVE 1.5 / RECON OWNER’S MANUAL | 21
CHARGING
TO CHARGE YOUR DEVICE USING A PC OR MAC:
1. Turn on your computer and power off your device (ensure your computer is not in stand-by mode).
2. First, connect the micro USB cable to your device, then plug the USB cable into the USB port on your computer.
3. Check that a red LED light above the USB port appears; this shows that your device is charging.
4. Keep charging until the red LED light turns off; this indicates that your device is fully charged.
TO CHARGE YOUR DEVICE USING A WALL CHARGER:
1. Power off your device. Connect the micro USB cable to the Recon Snow2 HUD, and then plug the USB cable into the wall charger shipped with
your unit. Plug the wall charger into a wall outlet.
2. Check that a red LED light above the micro USB port appears; this shows that your device is charging.
3. Keep charging until the red LED light turns off; this indicates that your device is fully charged.
Note
: In optimal conditions, the Recon Snow2 HUD can achieve a fast charge (80% of battery) using your computer or wall charger in one hour. The
Recon Snow2 HUD can be fully charged after a recommended four-hour period.
FIRMWARE UPDATES
Visit
www.engage.reconinstruments.com
to download the Recon Uplink App and update the Recon Snow2 HUD firmware.
1. Power up your Snow2 and connect it to your computer using the provided USB cord.
2. Wait for Recon Uplink Desktop App to recognize your Snow2 and then follow the prompts to register your Heads-up Display. (NOTE: You may be
required to open the Recon Uplink Desktop App on your computer, if it didn’t launch automatically).
3. Wait for Recon Uplink Desktop App to sync your Snow2 data to your Recon Engage account, then update your Snow2 to the latest firmware
version (if available).
4. On your Snow2 HUD, select “OK” on the firmware update popup using your Snow2 remote to initiate the firmware update.
Your HUD will then reboot automatically and will go through the software update process. Once the software update is complete, you will be
prompted to press any button on your remote to reconnect it with your Snow2.
Operational notes:
Features and functionality of Recon Engage are supported by internet connection.
IMPORTANT:
Make sure Snow2 is fully charged before performing a firmware update. If your battery is not sufficiently charged and Snow2 loses
power during the upgrade, your device can be permanently damaged. Recon recommends that you plug your device into the AC wall charger while
doing the firmware update.
To verify that your device has been successfully updated, navigate to Software Version under About in the Settings menu of your Snow2.
