NXP Semiconductors
UMxxxxx
Install Guide
All information provided in this document is subject to legal disclaimers.
Preliminary 1
— September 6, 2013
© NXP B.V. 2013. All rights reserved.
45 of 70
5.12
Prototype Area
Additional circuits may be required to for an application beyond the intended scope of the Fm+ Development
Board (OM13260). For example, using different value pull-up resistors to those supplied, or other circuit
experiments.
The Prototype area is available, and consists of pads and holes on a 100mil (2.54mm) grid. Power for these
components is made available at several connector points (CN15 is ground, CN21 is +3.3V, and CN22 is +5V).
See figure 5.39 and figure 5.40.
Fig 5.39. Prototype Area circuit
Fig 5.40. Prototype Area section
Summary of Contents for OM13260
Page 71: ......