NXP Semiconductors MPC5746R, Datasheet

Page: 97 / 98

Table 61. Revision history (continued)
Revision Date Description of changes
• Modified the descriptions in the two paragraphs after the tables.
• Removed the third paragraph after the tables and the first Note.
Added section DSPI CMOS slave mode .
In section Ordering information table "Ordering Information", changed Part Numbers for the 176
LQFP PD and the ED.
5 10/2016 Editorial updates.
In section Operating conditions table "Device operating conditions" added foootnote to
V
DD_HV_IO_JTAG
.
In section Input pad specifications table "I/O input DC electrical characteristics" for I
LKG
added
condition "V
SS
< V
IN
< V
DD_HV_IO*
"
In section ADC input description table "Analog Input Leakage and Pull-Up/Down DC electrical
characteristics" for ILK_AD added conditions "V
SS_HV_ADV_SAR
< V
IN
< V
DD_HV_ADV_SAR
" and
"V
SS_HV_ADV_SD
< V
IN
< V
DD_HV_ADV_SD
".
In section Recommended power transistors table "Recommended operating characteristics" for
I
CMaxDC
changed the parameter from "Minimum peak collector current" to "Maximum DC collector
current".
In section SAR ADC table "ADC conversion characteristics":
• Removed the condition for t
sample
.
• Removed the Min and added the formula (6.02*ENOB) + 1.76 for SINAD.
• Changed the Min value from 650 to 700 for t
conv
.
In section S/D ADC table "SDn ADC electrical specification":
• Removed Z
IN
specification
• Added Z
DIFF
, Z
CM
, and
Δ
V
INTCM
specifications
• For R
BIAS
:
• Changed Parameter description from "Bias resistance" to "Bare bias resistance"
• Changed Min from 100 kΩ to 110 kΩ
• Changed Typ from 125 kΩ to 144 kΩ
• Changed Max from 160 kΩ to 180 kΩ
In section Flash memory AC timing specifications table "Flash memory AC timing specifications" for
t
psus
:
• Changed Typical from 7 μs plus four system clock periods to 9.4 μs plus four system clock
periods
• Changed Max from 9.1 μs plus four system clock periods to 11.5 μs plus four system clock
periods
6 05/2017 Changed Freescale to NXP throughout the datasheet.
In Ordering information added rows for SPC5746RK1MLU3, SPC5745RK1MMT5 and
SPC5743RK1MLU5.
In Table 3 added footnote in V
DD_HV_PMC
In Table 28 for the rowset C
HV_FLA
changed the Minimum and Typical values.
Revision history
SPC5746R Microcontroller Data Sheet, Rev. 6, 06/2017
NXP Semiconductors 97