NXP Semiconductors MIMXRT1050, Hardware User'S Manual, Page: 16 / 19

Contents of the Evaluation Kit
MIMXRT1050 EVK Board Hardware User’s Guide, User's Guide, Rev. 2, 03/2018
16 NXP Semiconductors
If developers want to use LCD, NXP provides an optional LCD module RK043FN02H-CT which has a
4.3 inches touch-screen and supports a resolution of up to 480*3(RGB)*272. This module contains two
FPC cables. The LCD interface can be connected to J8(A1-A40) and the CPT interface can be connected
to J8(B1-B6). LCD modules can be purchased from the NXP website.
3. PCB Information
The MIMXRT1050 EVK Board is made using standard 4-layer technology. The material used was FR-
4. The PCB stack-up information is shown in
Table 7.
Table 7. Board stack-up information
Layer Description Copper(Oz) Dielectric
Thickness(mil)
1 Signal 1
—
Dielectric — 3
2 GND 1
—
Dielectric
—
52
3 Power 1
—
Dielectric
—
3
4 Signal 1 —
4. EVK Design Files
The schematics, layout files, and gerber files (including Silkscreen) can be downloaded from
nxp.com/MIMXRT1050-EVK
5. Contents of the Evaluation Kit
Table 8. EVK contents
Item Description
EVK Board EVK Board with processor, memory, interfaces, etc
USB Cable USB cable (Micro-B to Standard-A)
NOTE
Power adaptor, Micro SD Card, LCD Module and Camera Module are not standard parts of the
Evaluation Kit.