© 2018 NXP B.V.
MIMXRT1050 EVK Board Hardware User’s
Guide
1. Introduction
This document is a Hardware User’s Guide for the
MIMXRT1050 Evaluation Kit (EVK) based on the NXP
Semiconductor i.MX RT1050 Processor. This board is fully
supported by NXP Semiconductor. This manual includes
system setup and debugging, and provides detailed
information on the overall design and usage of the EVK board
from a hardware systems perspective.
1.1. Board overview
This EVK board is a platform designed to showcase the most
commonly used features of the i.MX RT1050 Processor in a
small, low cost package. The MIMXRT1050 EVK board is an
entry level development board, which gives the developer the
option of becoming familiar with the processor before
investing a large amount or resources in more specific
designs.
NXP Semiconductors
Document Number: MIMXRT1050EVKHUG
User's Guide
Rev. 2 , 03/2018
Contents
1.
Introduction ........................................................................ 1
Board overview ....................................................... 1
MIMXRT1050 EVK Contents ................................ 3
MIMXRT1050 EVK Board revision history ........... 3
2.
Specifications ..................................................................... 4
i.MX RT1050 Processor ......................................... 6
Boot Mode Configurations ...................................... 7
Power Tree .............................................................. 7
SDRAM memory .................................................. 10
SD Card Slot ......................................................... 10
Hyper Flash ........................................................... 11
QSPI Flash ............................................................ 11
Ethernet Connector ............................................... 11
USB PHY Connector ............................................ 11
Audio input / output Connector ............................. 12
OpenSDA circuit (DAP-Link) .............................. 12
JTAG Connector ................................................... 12
Arduino Expansion Port ........................................ 13
Camera Module Connector ................................... 14
User Interface Switch ............................................ 14
Sensor ................................................................... 15
User Interface LED Indicator ................................ 15
LCD Interface ....................................................... 15
3.
PCB Information .............................................................. 16
4.
EVK Design Files ............................................................ 16
5.
Contents of the Evaluation Kit ......................................... 16
6.
Revision history ............................................................... 17