Chapter 1
Introduction to the Development Kit
22
© NXP Semiconductors 2017
JN-UG-3121 v1.1
1.5 ZigBee Smart Home Demonstration
Certain components of the kit are pre-loaded with the software for a simple
demonstration network. Running this ZigBee Smart Home Demonstration will allow
you to use components of the kit without programming them yourself.
The demonstration is a lighting system which allows the white LEDs on a node/board
(Dimmable Light) of a WPAN to be controlled (switched on/off, brightness adjusted) in
the following ways:
From within the WPAN using the buttons on a controller node/board
(Dimmer Switch)
From outside the WPAN via an IP connection from a PC
The demonstration system is of the form shown in
on page
.
More detailed information and instructions on how to run the demonstration are
provided in
Note 1:
A Quick Start procedure for running this
demonstration is also provided on the
JN517x-DK005
Getting Started sheet (JN-UG-3120)
, which is supplied
in the kit box.
Note 2:
The demonstration applications are based on
the ZigBee 3.0 devices detailed in the Application Notes
listed in
.
