JN517x-DK005
Development
Kit
User Guide
JN-UG-3121 v1.1
© NXP Semiconductors 2017
11
The full contents of the kit are listed below (numbers refer to
above).
1.
Raspberry Pi 2 single-board computer (Model B) and microSD card
(Note
a
)
2.
Wi-Pi Raspberry Pi 802.11n wireless adaptor (for Wi-Fi connectivity)
3.
2 JN5179 USB Dongles with integrated antenna
(Note
b
)
4.
2 Carrier Boards with integrated NFC tags:
4a.
One pre-fitted with a Generic Expansion Board and a
JN5179 standard-power module with integrated antenna
(Note
b
)
4b.
One pre-fitted with a Lighting/Sensor Expansion Board and a
JN5179 standard-power module with integrated antenna
(Note
b
)
5.
2 JN5179 high-power modules
(Note
c
)
6.
2 antennas with fly-leads for JN5179 modules with uFL connectors
7.
PN7120 NFC Controller Board with Raspberry Pi Interface Board
8.
5V DC power supply unit (universal type) with USB ports for Raspberry Pi
9.
‘USB to Micro USB’ cable (for powering Raspberry Pi from 5V PSU)
10.
2 'USB to USB' extension cables (for use with Wi-Pi adaptor and USB dongle)
11.
2 'USB A to Mini B' cables
12.
RJ45 Ethernet cable
13.
microSD card adaptor
14.
Pack of 10 AAA batteries
Notes:
a)
The Raspberry Pi 2 board’s microSD card is programmed with NXP firmware (an adaptor is
provided to allow re-programming of the microSD card from a PC).
b)
The pre-fitted JN5179 modules and the JN5179 USB Dongle with a green sticker are pre-
programmed with the relevant binaries for the ZigBee Smart Home Demonstration. The
JN5179 USB Dongle with a red sticker is pre-programmed as a packet sniffer.
c)
The JN5179 high-power modules provide an RF output of +20dBm (compared with the
+10dBm of a standard-power module) and can only be used in territories where the RF
regulations allow them.
For more details on the hardware components of the kit, refer to
Additional Nodes (Available Separately)
JN517x-XK030 Generic Node Expansion Kit:
Carrier Board with a Generic
Expansion Board and JN5179 module with integrated antenna
JN517x-XK040 Lighting/Sensor Node Expansion Kit:
Carrier Board with a
Lighting/Sensor Expansion Board and JN5179 module with integrated antenna
JN5179 USB Dongle (OM15021):
Pre-programmed as a packet sniffer
