NXP Semiconductors JN516x-EK001, User Manual, Page: 67 / 86

JN516x-EK001 Evaluation Kit
User Guide
JN-UG-3093 v1.5 © NXP Laboratories UK 2015 67
Appendices
A. Remote Control Operations in the Demonstration
In the pre-loaded JenNet-IP Smart Home Demonstration, control commands can be
entered into the Remote Control Unit and wirelessly broadcast (in IEEE 802.15.4
packets) to the WPAN nodes.
Table 9 below provides a summary of the use of individual keys by the demonstration
and Figure 34 shows the keypad of the Remote Control Unit. A complete list of the
operations that can be performed from the keypad is provided in Table 10 on page 68 .
Key Function Description
I ON Switch on light(s)
O OFF Switch off light(s)
+ UP Increase brightness of light(s)
- DOWN Decrease brightness of light(s)
# PRG Programming mode
*
ALL All groups
A GRP Group A
B Group B
C Group C
D Group D

Wake Wake Remote Control Unit from sleep
Table 9: Key Functions on Remote Control Unit
Figure 34: Keypad of Remote Control Unit