NXP Semiconductors JN516x-EK001, User Manual, Page: 33 / 86

JN516x-EK001 Evaluation Kit
User Guide
JN-UG-3093 v1.5 © NXP Laboratories UK 2015 33
1.3.8.1 Raspberry Pi
The Raspberry Pi single-board computer (Model B+) is supplied with accessories
consisting of:

Dedicated 5V DC power supply unit (universal type)

microSD card (pre-installed)

RJ45 Ethernet cable
The board and its accessories are shown in Figure 24 below (the JN5168 USB Dongle
shown is also supplied in the kit - see below).
Figure 24: Raspberry Pi Board and Accessories
Caution: The external PSU acts as a disconnect device
to isolate the equipment from the mains supply. It should
also be noted that it depends on over-current protection
of the building installation.
Note 1: The USB Dongle can be plugged directly into
any of the USB ports of the Raspberry Pi board.
Note 2: The Raspberry Pi must be connected to a LAN
containing a DHCP server, such as a Wi-Fi router - refer
to
Figure 23 on page 32 . The Border-Router can then be
accessed from other devices on the LAN, including

Wi-Fi devices (if available).