NXP Semiconductors JN516x-EK001, User Manual, Page: 27 / 86

JN516x-EK001 Evaluation Kit
User Guide
JN-UG-3093 v1.5 © NXP Laboratories UK 2015 27
1.3.6 JN5168 Modules (JN5168-001-T0y)
Four types of JN5168-based module are supplied in the kit. Each type is a

JN5168-001-M0y module mounted on a (short) Mezzanine Board (DR1179), the part
number of the combined component being JN5168-001-T0y.

JN5168-001-T00 (JN5168-001-M00 mounted on Mezzanine Board)
Two of these modules are supplied, pre-fitted on Carrier Boards. The module
features a JN5168-001 wireless microcontroller and an integrated PCB
antenna.

JN5168-001-T03 (JN5168-001-M03 mounted on Mezzanine Board)
Two of these modules are supplied, pre-fitted on Carrier Boards. The module
features a JN5168-001 wireless microcontroller. A uFL connector is used to
connect the module to an antenna on the Carrier Board via a fly lead (see
below).

JN5168-001-T05 (JN5168-001-M05 mounted on Mezzanine Board)
Two of these modules are supplied. The module features a JN5168-001
wireless microcontroller and provides a 10dBm high-power output, suitable for
worldwide use. As a high-power module, it can be used to replace a pre-fitted
standard-power module in order to achieve a larger radio transmission range. A
uFL connector is used to connect the module to an antenna on the Carrier Board
via a flying lead (see below). Intended for worldwide markets.

JN5168-001-T06 (JN5168-001-M06 mounted on Mezzanine Board)
Two of these modules are supplied. The module features a JN5168-001
wireless microcontroller and provides a 22dBm high-power output, intended
only for the North American (FCC and IC) markets. As a high-power module, it
can be used to replace a pre-fitted standard-power module in order to achieve
Figure 18: DR1215 LCD Expansion Board