Distributor of NXP Semiconductors: Excellent Integrated System Limited
Datasheet of MPC8569E-MDS-PB - BOARD MOD DEV SYSTEM MPC8569
Contact us: [email protected] Website: www.integrated-circuit.com
MPC8569E-MDS-PB Hardware Getting Started, Rev. 3.1
Freescale Semiconductor
31
Getting Started Procedures
13 Getting Started Procedures
This section outlines “Getting Started” procedures for the MPC8569E-MDS-PB including use of the JTAG
connectivity unit. Optional modules are detailed in Section 12.
Procedure 1: Check hardware kit contents (Section 4).
Procedure 2: Check PB default switch settings (Section 6).
Procedure 3: Check PB default connector settings (Section 7).
Procedure 4: Establish working environment (Section 12).
Procedure 5: Insert plastic guide pins into PB.
1. Insert three guide pins. Pins hold
UEM modules used in RGMII and
RTBI modes.
2. Insert three guide pins. Pins hold
UEM modules (SGMII mode) used
for SerDes Options 1, 2 and 3. See
Section 12, Set-up 1.
Procedure 6: Assemble and connect 5V power supply.
NOTE!
Ensure Power-OFF.
1. Assemble AC/DC power supply kit:
a) Cable with country-specific wall
outlet plug.
b) Power supply unit and cable with
plug (for board connection).
2. Connect the AC/DC power supply
cable to the 5V IN on-board jack
(P2).
3. Plug the power cable into the wall
outlet.
SerDes Guide Pins (3)
Guide Pins (3)
AC/DC Power Supply
P2
32 / 39
32 / 39
