NXP Semiconductors
AN11268
Quick startup guide for POS Development Kit OM5597/RD2663
AN11268
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2014. All rights reserved.
Application note
COMPANY PUBLIC
Rev. 1.0 — 2 September 2014
242410
3 of 17
1. Introduction
1.1 Scope
The purpose of this document is to provide a guideline to aid in the first operation of the
OM5597 RD2663 Point of Sales Development Kit (further referenced to as POS DK).
1.2 General Description
The POS DK can be used to demonstrate, evaluate and adapt the simple implementation
of NXP’s devices in Point of Sales terminals.
Both contactless and contact applications can easily be evaluated. This development kit
is EMV level1 digital and analog certified and therefore an ideal starting point to develop
specific POS terminals based on NXP components.
The design embeds all the required hardware and software for the following interfaces:
•
EMVCo compliant contactless smart cards based on RC663,
•
EMVCo compliant contact smart cards based on TDA8026,
•
Up to four secure access modules (SAMs) via TDA8026.
The user interface is composed of a color LCD display and a pin pad.
The default hardware interface is RS-232, which is used for code uploading and
debugging. However, a USB 2.0 full speed connector is also offered but not implemented
in the default software.
1.3 Package Content
The OM5597/RD2663 POS Development Kit comes in a package containing the
following items:
1. POS DK including firmware
2. USB cable
3. MIFARE DESFire EV1 card [8]
4. Personalized JCOP dual-interface payment card [10]
A SAM is not part of this kit and must be ordered separately.
Downloaded from
Downloaded from
Downloaded from
