NXP Semiconductors
AN11268
Quick startup guide for POS Development Kit OM5597/RD2663
AN11268
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2014. All rights reserved.
Application note
COMPANY PUBLIC
Rev. 1.0 — 2 September 2014
242410
9 of 17
2.2.3 Payment System Environment
This showcase demonstrates how to read out basic information from one of the cards
provided with this development kit (MIFARE DESFire EV1 and JCOP dual-interface)
1. Power on the POS DK
2. Press any key. The INFO menu appears
3. Press key ‘2’ to select the INFORMATION sub-menu
4. Press key ‘2’ to select the CARD INFO sub-menu. As shown in Fig 9 you are
asked to present the card.
Fig 9.
Present card
5. Put either one of the cards on the antenna of the contactless reader or put the
JCOP card in contact reader. In the second case consider the correct orientation
of the card: contact-interfaces to the front and upside
6. You can ether present the card to the antenna of the reader or put it into the card
slot. In the second case please keep in mind the slot in direction. (Chip
connector first and up)
The display now shows the name of the detected application. In this case it is ‘POS RD
Banking Card’ as seen in Fig 10.
Fig 10. Application Identifier
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
