6.3. Mechanism installation direction change
This barrier mechanism can be both left-installed and right-installed.
The users can change the installation direction according to the actual
situation. We will take the left-installed barrier mechanism as an
example. The below description is telling you how to change from
left-installed to right-installed:
6.3.1. Disassemble boom holder: take out the 10MM screw by turning
8MM Allen wrench counterclockwise; And then push out the boom
holder by turning wrench clockwise with a 14MM* 150 screw.
6.3.2. Change the mechanism installation direction: disassemble 6
sets 8MM screws for fixing the mechanism panel, turn the mechanism
180 degrees vertically and put back into the cabinet. And then fix it
with the 6 sets screws.
6.3.3. Assemble boom holder: assemble the boom holder back, and fix
the l0MM screw by turning 8MM Allen wrench clockwise. And then
the mechanism installation direction change is finished.
Take out the 10MM screw by turning
8MM Allen wrench counterclockwise
Push out the boom holder by turning wrench
clockwise with a 14MM* 150 screw
Disassemble
6 sets 8MM
screws
Turn the mechanism 180
degrees vertically
Put the mechanism into
the cabinet
A s s e m b l e t h e b o o m h o l d e r
back, and fix the l0MM screw
by turning 8MM Allen wrench
clockwise
(step 3)
(step 4)
(step 1)
(step 2)
(step 5)
4
.
.
5
.
.
