Nvidia SHIELD TABLET K1, User Manual

Page: 78 / 85

Copyright © 2015 NVIDIA Corporation
This symbol indicates the presence of hazardous energy circuits or electric shock hazards. Refer all servicing
to qualified personnel.
WARNING: To reduce the risk of injury from electric shock hazards, do not open this enclosure. Refer all
maintenance, upgrades, and servicing to qualified personnel.
Headset/Earphone volume level notice
WARNING: To prevent possible hearing damage, do not listen at high volume
levels for long periods.
general precautions
To reduce the risk of electric shock, personal injury, or damage to the equipment, observe the following precautions:

Follow all cautions and instructions marked on the equipment.

Do not bend, drop, crush, puncture, incinerate, or push objects into openings of the gaming console.

Do not connect or disconnect any cables or perform maintenance or reconfiguration of this product during an
electrical storm.

Do not use the SHIELD tablet in rain or near sink, or other wet locations. Take care not to spill any food or
liquid into the console. In case the SHIELD tablet gets wet, unplug all cables and turn off before cleaning, and
allow it to dry thoroughly before turning it on again.

Do not expose the SHIELD tablet to any gas which is not normally contained in the atmosphere. It may cause
mis-operation or defects.

Never turn on any equipment when there is evidence of fire, water, or structural damage.

Place the product away from radiators, heat registers, stoves, amplifiers, or other appliances that produce heat.

Never force a connector into a port. Check for obstructions on the port. If the connector and port don't join with
reasonable ease, they probably don't match. Make sure that the connector matches the port and that you have
positioned the connector correctly in relation to the port.

If you use an AC Power Adapter to charge the gaming console, make sure the power adapter is fully assembled
before you plug it into a power outlet. Then insert the AC Power Adapter firmly into the power outlet. Do not
connect or disconnect the AC Power Adapter with wet hands.

Operate the AC adapter in a ventilated area.

When you are using the NVIDIA SHIELD tablet or charging the battery, it is normal for the system and/or AC
power adapter to get warm.

Do not use conductive tools that could bridge live parts.

Do not make mechanical or electrical modifications to the equipment.

Never attempt to repair the SHIELD tablet yourself. This device does not contain any user-serviceable parts.
Do not attempt to open, disassemble, or remove the battery. You run the risk of electric shock.

To clean the display, use a soft, lint-free cloth. If necessary, breathe upon the display surface and wipe off
immediately and softly. Avoid getting moisture in openings. Don't use window cleaners, household cleaners,
aerosol sprays, solvents, alcohol, ammonia, or abrasives to clean the display.

Operate the SHIELD tablet in a place where the temperature is always between 5 and 30°C (41 to 86°F).

Store the SHIELD tablet in a place where the temperature is always between 0 and 35°C (32 to 95°F) with
relative humidity of 70% or lower. When taking the device from a low temperature condition, allow the device to
reach room temperature before turning the power on.

Use this product only with approved equipment and/or accessories

If the product sustains damage requiring service, disconnect the product from the AC electrical outlet and refer
servicing to an NVIDIA authorized service provider.