Nvidia Quadro Workstation, User Manual

Page: 80 / 253

68 Quadro Workstation User’s Guide
Chapter 5
Configuring Displays
Adjusting Television (TV) Settings
If you have a television connected to your computer, follow the steps in this section
to access page where you can choose the correct regional format for TV reception,
choose the correct TV connection mode, and configure several TV display settings.
If your television is the only display connected to your computer and you do not the see the
nView Display Settings option
on the NVIDIA display menu, you will see the following
options on the menu: TV Settings and Screen Adjustment
Note: If you do not see the “TV Settings” or the “Screen Adjustment” pages, go to
the information in the next bullet.
1 Click TV Settings to display the TV Settings page ( Figure 5.4 ). For details, see
TV Settings , the next section.
2 Click Screen Adjustment to open the TV Output page where you can configure
TV display settings. For details, see “Device Adjustments — TV Output” on
page 70 .
If your television is the only display connected to your computer directly (or through a VCR
or switch box or receiver) and you do not see the nView Display Settings option and also do
not see the TV Settings and the Screen Adjustment option
on the NVIDIA display menu,
then follow these steps.
1 Open the Tools page by clicking the Tools option from the NVIDIA display
menu. Figure 7.15 in Chapter 8 shows the Tools page.
2 Select the Force TV detection check box and click Apply .
3
You should now be able to see the TV Settings and Screen Adjustment options
on the NVIDIA display menu.
4 Click TV Settings to display the TV Settings page ( Figure 5.4 ). For details, see
TV Settings , the next section.
5 Click Screen Adjustment to open the TV Output page where you can configure
TV display settings. For details, see “Device Adjustments — TV Output” on
page 70 .
If you have more than one display connected, including your television , follow these steps.
1 Click nView Display Settings from the NVIDIA display menu.
2 Left click on the display image that represents your TV to select it.
3 Then right click on that display image and select Select TV format or Device
Adjustments, depending on the task you want to perform.
4 Click Select TV format to display a list of the common TV regional settings and
choose a setting that applies to your region.
QuadroGuide_.book Page 68 Monday, April 3, 2006 12:21 PM