Note:
WARNING! The voltage and signal on the frame lock ports are different
from Ethernet signals. Do not connect a Frame lock port to an Ethernet
card or network hub. Doing so can cause damage to the hardware.
2. Designate one of the displays to be the server device. The remaining
displays are client devices.
The server determines the trigger pulse for the client devices. The
trigger pulse is derived from the V-Sync signal of the server video.
Set Up the Server Software
Frame Lock is supported across an arbitrary
number of Quadro G-Sync II systems.
Note:
All displays connected to the same GPU to be included
in the frame lock group must be confi gured with
identical display-mode timings and refresh rates.
Any X Server can be added to the frame lock group, provided that:
The system supporting the X Server is con
fi
gured to
support frame lock and is connected via RJ45 cable
to the other systems in the frame lock group.
The system driving nvidia-settings can communicate with
the X server that is to be included for frame lock. This means
that either the server must be listening over TCP and the
NVIDIA Frame Synchronization Under Linux
Four frame locked systems
Server
Client
Client
Client
Out
In
Out
Out
In
In
35
Summary of Contents for QUADRO G-SYNC II
