Normally, the software automatically detects the signal
type that is being used. If necessary, you can force the
software to detect the signal type as follows:
1. Click
Detect
to force detection of the signal type.
2. The software tests each signal type and stops when it detects a match.
3. If the signal type cannot be detected, click the
Video Mode
list box
arrow and then click the item corresponding to the signal source.
4. Click
Composite, Auto
if you want the frame lock
board to classify the signal as bi-level or tri-level.
Understanding the Status Indicators
The G-Sync Devices section displays the status of the
sync signals as well as the status of the RJ45 ports. The
two ports are represented by connector icons.
NVIDIA Frame Synchronization Under Linux
NVIDIA Quadro G-Sync II Port
33
Summary of Contents for QUADRO G-SYNC II
