Nvidia QUADRO G-SYNC II, User Manual

Page: 14 / 73

How To Set Up Genlock
The following are the basic steps to genlocking a system.
Detailed instructions are provided in the related sections:

Set Up the Hardware
Connect the external sync source to the BNC
connector on the graphics board.
 Set Up the Software
Use the NVIDIA Control Panel Workstation->Synchronize
displays page to establish the system as the server, to
choose the sync source, and con
fi gure the sync pulse.
Set Up the Hardware
1. Start the system, then connect the external source signal to the House
Sync connector (BNC) of the Quadro G-Sync II option card.
The Quadro G-Sync II supports the following
external synchronization signal types:
 TTL (3.3 volt level)

Composite Bi-level (NTSC or PAL sources
use bi-level composite signals)
 Composite Tri-level (HDTV sources commonly
use tri-level composite signals)
NVIDIA Quadro G-Sync II User Guide
10