Shelf Manager ACB-VI
Safety
1
R1.2, March 2018
1 Safety
The intended audience of this User’s Manual is system integrators and hardware/software
engineers. This manual describes the hardware features of the Schroff ACB-VI Shelf
Manager. The software features are detailed in the ShMM-700R documentation from
Pigeon Point Systems and the Schroff firmware release notes.
1.1 Safety Symbols used in this document
1.2 General Safety Precautions
• Service personnel must know the necessary electrical safety, wiring and connection prac-
tices for installing this equipment.
• Install this equipment only in compliance with local and national electrical codes.
• For additional information about this equipment, see the PICMG 3.0
Specification (
Hazardous voltage!
This is the electrical hazard symbol. It indicates that there are dangerous voltages inside the
Shelf.
Caution!
This is the user caution symbol. It indicates a condition where damage of the equipment or
injury of the service personnel could occur. To reduce the risk of damage or injury, follow all
steps or procedures as instructed.
Danger of electrostatic discharge!
The Shelf contains static sensitive devices. To prevent static damage you must wear an ESD
wrist strap.
Warning!
Voltages over 42 V
AC
or 60 V
DC
can be present in ATCA Shelves. As defined in the PICMG 3.0
Specification, this equipment is intended to be accessed, installed, and maintained by
qualified and trained service personnel only.