Nuvo NV-WCPS, Installation And User Manual

Page: 12 / 40

9
II. Installing the Wireless Control Pad
The Wireless Control Pad is easily integrated into I8G, E6G or Renovia audio system.
Within minutes complete wireless control of the NuVo System is literally in the palm of
your hand.
The Coordinator Installation (Fig. 3)
The Coordinator is designed to communicate with up to five Wireless Control Pads. A
single CAT5 connection from the Coordinator to a “Device” input on the Grand Concerto
EZ Port or Essentia E6G Allport enables communication. If all “Device” inputs are used
on the EZ Port or Allport, the Coordinator can be plugged into an available RJ45 port on
the back. When the Coordinator is plugged into NuVoNet, the blue power LED will light
(provided the NuVo amplifier is plugged into an AC outlet and its power button is
engaged).
Note that an external power supply should not be used with the Coordinator.
The CAT5 cable can be extended up to 150 feet in length to allow for optimal placement
of the Coordinator in the home.
Figure 3 – The Coordinator Installation
POWER SETUP
R
SYS ON
EXT. MUTE
SUM1
3033118
C US
CONFORMS TO
UL STD.6500
CERTIFIED TO
CAN/CSA STD.E60065
NuVo Technologies Cincinnati Ohio USA
FUSE:T5 A 120V 60Hz 500W
MODEL NV-I8DM
SIX SOURCE EIGHT ZONE
AUDIO DISTRIBUTION SYSTEM
www.nuvotechnologies.com
VARIABLE
OUTPUT
FIXED
OUTPUT
TIP=L
RING=R
RS-232
CONNECT TO
NV-I8X
USE NV-SLC1
CABLE
CONNECT TO
NV-I8EZP1
USE NV-NC1
CABLE
USE CNLY WITH 250V FUSE
SUM2
OUTPUT POWER
20W/6OHM X2
ZONE 7&8
SYSTEM NETWORK DIGITAL LINK
PROGRAM