Nuvo NV-WCPS, Installation And User Manual

Page: 24 / 40

V. Restore Factory Defaults (Fig. 12)
Once the Wireless Control Pad has been configured and establishes communication
with the Coordinator, the only way to disassociate it from the system is to restore it to
its original factory settings. The restore process is done by holding the Wireless
Control Pad “Reset” button and the Wireless Control Pad “Zone” button
simultaneously. Release the “Reset” button while still holding the “Zone” button until
the Wireless Control Pad display reads
Restoring Factory Defaults…
Restoring the Coordinator to factory default is done by pressing and holding the
“Setup” button until the SETUP LED flashes rapidly for twenty seconds.
Restoring the Repeater to factory defaults is done by pressing and holding the SETUP
until the LED blinks rapidly.
21
MENU ZONE
Restoring Factory
Defaults...
The Reset button is located
inside the Wireless Control Pad
housing. The end of a paperclip works
best as a reset tool.
Figure 12 – Restore Factory Defaults