8
STEP 6:
Plug the Sound Bar power cable with the 90° angled head into the Sound Bar power cord inlet on the back of the Sound Bar.
STEP 7:
Plug the Subwoofer power cable into the Subwoofer power cord inlet on the back of the Subwoofer.
STEP 8:
Pair the Sound Bar to the Subwoofer using one of the following methods, as appropriate.
Note:
The Sound Bar and Subwoofer should already be paired from the factory. This step is only necessary if the Sound Bar has been reset to factory
default.
Method 1: pairing a Sound Bar with a new Subwoofer
•
Press the sync button on the Subwoofer until the LED flashes blue, approximately five (5) seconds.
•
Press the sync button on the Sound Bar until the red LED turns off on the Sound Bar.
•
When the Subwoofer LED changes to a solid green color, the pairing is complete.
•
Unplug the Sound Bar and Subwoofer until installation is complete.
Method 2: pairing a Subwoofer that has previously been paired to a Sound Bar [reset required]
•
Reset the Sound Bar to the factory default state:
–
TO SET THE SOUND BAR TO FACTORY DEFAULT:
While the Sound Bar is powered up, press the volume down (–) and volume up (+) buttons on
the front of the unit until the LEDs turn off, approximately five (5) seconds. Release the buttons and wait approximately 60 seconds for the Sound Bar
to reboot and the power LED to turn solid green. The Sound Bar is reset.
•
Unplug the Sound Bar.
•
Press and hold the sync button on the Subwoofer until the LED flashes blue, approximately five (5) seconds.
•
Plug in and set up the Sound Bar.
•
Press and hold the sync button on the Sound Bar for approximately five (5) seconds.
•
The Subwoofer Sync LED stops flashing blue when the pairing is complete.
•
Unplug the Sound Bar and Subwoofer until installation is complete.
Fig. 6 / Fig. 6 / Abb. 6 / Fig. 6 / Fig. 6 / Fig. 6
STEP 9:
If mounting the Sound Bar to the wall, slide the Sound Bar over the top of the mounting bracket until the tabs on the back of the Sound Bar lock
into place over the top lip of the mounting bracket. Make sure all of the cables exit the sides and are not pinched between the Sound Bar and the mounting
bracket. Secure the Sound Bar to the mounting bracket using the safety latch. (Fig. 6)
STEP 10:
Connect the Sound Bar cables to the television (TV):
•
Ethernet cable to the Ethernet port on the TV
•
Red RCA cable to the corresponding audio output jack on the TV
•
White RCA cable to the corresponding audio output jack on the TV
•
TOSLINK Cable to the optical output port on the TV
STEP 11:
Plug the Sound Bar and Subwoofer into the appropriate power outlets and power on the devices.
STEP 12:
Download and launch the Nuvo Player Portfolio App from the Apple App Store or the Google Play store. Follow the on-screen instructions in the
App to complete the P500 setup.
