Nuvico HR-1600, Instruction Manual, Page: 77 / 86

78 HR Series NVR
IX. BACKUP
1. Back Up
1.1 External DVD- R/W
1. External USB-HDD, CD/DVD-RW is recognized within 10 seconds after plug in USB
connection cable to USB port in NVR.
1) Plug in USB connector into the USB connection port on the front panel.
2) Press [BACKUP] button to display the backup menu.
3) Use the [-, +] buttons to change device selection: USB CD/DVD RW
4) Use the [-, +] button to select a channel. All channels are set by default.
5) Select the data for BACKUP.
(1) ALL Data: Normal Recording Data
(2) Event Only: Event Recording Data.
6) File format when saving is “.s” AVI is not supported for CD/DVD
7)
Select the time range starting time and ending time.
8)
Enter the numbers as required in 24-hour format, then move to .
9)
Press the [+] button to start BACKUP.
.
2. The progress of the backup is displayed at the bottom of the window as a percentage of
the entire backup process. The OSD disappears by pressing cancel button. However,
pressing the Backup button again will show the Backup status. It is recommended that
playback is not performed while the NVR is in a backup session.
1)
When finished, the media is ejected.