Nuvico HR-1600, Instruction Manual, Page: 46 / 86

45 HR Series NVR
6. NETWORK
A static service consists of an IP address that remains constant for the duration of the
contract of the internet service, whereas a dynamic service has an IP address that changes
every time a new connection is made through the provided modem, or recurrently in a given
period of time. Though most internet service providers offer both solutions, this manual will
distinguish between the two solutions, according to the commonly available service types, to
configure the NVR for the networking purposes.
6.1. LAN Port
1. LAN PORT
1) Config: Select IP address type.
2) IP Address: Enter the static IP address
3) Netmask: Enter the IP address of the subnet mask.
4) Gateway: Enter the IP address for the internet gateway server.
5) PRI.DNS Server: Verify the name of the domain name system.
6) SEC.DNS Server: Enter the IP address of the backup domain name system (DNS)
server that the NVR will use to convert name to IP address. This server is used if the
primary DNS server fails.
<Note> if you do not set up the DNS server correctly, it will have problem with mail
sending.