Nuvico HR-1600, Instruction Manual, Page: 65 / 86

VII. PAN/TILT ZOOM CONTROL
PTZ control is available for supported third
configured for each camera channel. For PTZ
The layout of the PTZ interface conforms to the layout of the front of the
controller. Menu button is the guide anchor position for all other buttons. When in PTZ
interface mode, all buttons used for the PTZ related operation.
1. P.T.Z. Menu
1)
To activate the Pan/Tilt Control, select the full screen display of the camera you wish
to control.
2)
Then press the [
P/T/Z/FOCUS
INDICATOR
[HELP] [CANCEL]
Press this button to display
[CANCEL]
Press this button to cancel “PAN/TITL” Operation.
[OK] Button
PTZ camera control interface will be extended to use whole function. Press
this button again to make short
To pan Right and Left.
Zooming In and Out.
66
PAN/TILT ZOOM CONTROL
for supported third-party dome cameras. The PTZ option must be
for each camera channel. For PTZ setup, refer to Camera Menu>
The layout of the PTZ interface conforms to the layout of the front of the
controller. Menu button is the guide anchor position for all other buttons. When in PTZ
interface mode, all buttons used for the PTZ related operation.
To activate the Pan/Tilt Control, select the full screen display of the camera you wish
P/T/Z/FOCUS
] button. Shortcut Menu box pops up, as shown below.
ACTIONS
ess this button to display “HELP” Menu. Press [OK]
[CANCEL] button to cancel Help Menu.
Press this button to cancel “PAN/TITL” Operation.
PTZ camera control interface will be extended to use whole function. Press
button again to make short-cut menu.
To Tilt up and Down.
To pan Right and Left.
Zooming In and Out.
<Note > Please Refer to Help Menu for specific control.
HR Series NVR
. The PTZ option must be
refer to Camera Menu> PTZ setup.
The layout of the PTZ interface conforms to the layout of the front of the NVR or the remote
controller. Menu button is the guide anchor position for all other buttons. When in PTZ
To activate the Pan/Tilt Control, select the full screen display of the camera you wish
button. Shortcut Menu box pops up, as shown below.
[OK] Button again, or
PTZ camera control interface will be extended to use whole function. Press
To Tilt up and Down.
for specific control.