Nuvico HR-1600, Instruction Manual, Page: 32 / 86

2.3. DEVICE
1) MOTIOM
Press SETUP button to set up motion function.
a. Motion Zone: Set
b. Motion Grid: The area property is highlighted and motion detection can now be
observed in the view window.
: Select All. Press [OK] to select.
: : Clear All. Press [OK
: Select specific. Press [OK] to select.
c. Motion Level: The sensitivity settings are
sensitivity. By default
d. APPLY: Save changed set up.
e. SAVE: Save changed set up and exit
31
Press SETUP button to set up motion function.
: Set up to 4 Motion areas defined by selected parts.
: The area property is highlighted and motion detection can now be
observed in the view window. By default, it’s set to OFF.
: Select All. Press [OK] to select.
: : Clear All. Press [OK] to select.
: Select specific. Press [OK] to select.
: The sensitivity settings are: 1: Low sensitivity ~ Level 20: High
By default, the level is set to 10.
: Save changed set up.
: Save changed set up and exit automatically.
To define the motion view area cell
following:
On the front panel or remote control, press any of
direction buttons to highlight a cell in the motion
detection area, then press [OK]. This area is selected
and the cells are highlighted in a blue color.
HR Series NVR
up to 4 Motion areas defined by selected parts.
: The area property is highlighted and motion detection can now be
: 1: Low sensitivity ~ Level 20: High
To define the motion view area cell-by-cell, do the
On the front panel or remote control, press any of
direction buttons to highlight a cell in the motion
detection area, then press [OK]. This area is selected
highlighted in a blue color.