Nuvair Coltri MCH 36 Electric User Manual Download Page 8

 

 

 

MCH36 Open Diesel (Kubota) 

www.nuvair.com                                                                                        Page | 6

 

MCH36 Open Diesel (Kubota) 

 

 

1.4 

Warranty 
 

 

The Materials Supplied by NUVAIR are covered by a 1 year warranty, the 1 year warranty 
begins from the date of purchase on the invoice. NUVAIR shall repair or replace those parts 
it acknowledges to be faulty during the warranty period.  

 
In replacing the faulty part, 

NUVAIR

 shall not be liable for any other expenses sustained by the 

dealer or his customer such as presumed damage (present or future), lost earnings or fines.  
 
Routine and unscheduled maintenance must be carried out in compliance with the instructions 
contained in this manual. Should the required work not be covered by the manual or assistance be 
required you are advised to contact 

NUVAIR 

directly by fax or email, even where agreements have 

already been made on the phone. 

NUVAIR

 cannot be held liable for any delays or failure to 

execute work.  
 

NUVAIR

 cannot be held liable for any damage or malfunctions caused by work carried out on the 

compressor by unauthorized personnel.  

 

NUVAIR 

guarantees that its compressors are free from defects design, workmanship and the used 

materials for a period of 1 year starting from the date of purchase on the compressor invoice; 
should the customer note any flaws and/or defects he must report them, in writing, 

to NUVAIR 

within 2 months of their discovery otherwise the warranty shall be rendered null and void.  
The warranty only covers flaws and faults that occur where the compressor is used properly in 
compliance with the instructions contained in this manual and where periodic maintenance is 
carried out. The warranty does not cover faults caused by improper use of the compressor, 
exposure to atmospheric agents (rain etc.) or damage during transport; all materials subject to 
wear and those subject to periodic maintenance are not covered by the warranty and are to be 
paid for by the customer in full; in any event the warranty is rendered null and void if the 
compressor is tampered with or if work is carried out on it by personnel who have not been 
authorized by

 NUVAIR. 

 

A compressor that has been acknowledged as faulty on account of flaws in design, workmanship 
or used materials shall be repaired or replaced free of charge by at 

NUVAIR

 at 2949 W 5th St., 

Oxnard, CA 93030 USA; costs regarding transport, delivery of spare parts and any materials 
subject to wear shall be met by the customer. Should warranty-covered work need to be carried 
out on the customer’s premises, travel and accommodation costs for personnel sent by 

NUVAIR 

shall be met by the customer. The act of taking delivery of machines and/or faulty components or 
the sending of technicians to assess the presumed defects and/or flaws reported by the customer 
does not in itself imply acknowledgement that the defect is covered by warranty. Repairs and/or 
replacements made by 

NUVAIR 

during the warranty period do not in any way prolong the latter 

itself. Acknowledgement that a defect is covered by warranty does not in itself mean that 

NUVAIR 

is in any way liable to award compensation. 

NUVAIR 

cannot be held liable for any other direct or 

indirect damages imputable to compressor defects and flaws (loss of production or earnings etc.) 
except in cases where serious negligence is demonstrated.  
 

Summary of Contents for Coltri MCH 36 Electric









































Reviews: