Nussbaum Sprinter Mobil 3000, Operating Instruction And Documentation

Page: 28 / 40

Operating Instruction and Documentation
Sprinter Mobil 3000
- 28 -
selected according to a floor without a surface covering. If the ground is covered with floor
tiles or some other form of surface covering, the bolts must be selected according to the floor
with floor covering.
• Installing the standard-automotive lift in a hazardous location or a washing bay is not
allowed.
• Before installation a sufficient foundation must be constructed. If the foundation is already
constructed then proof that the foundation conforms to the standard is required.
A level foundation for the installation is required. The foundations must be based in a frost
resistance depth, both outdoors and indoors in a position where the installer believes there is
no chance of frost.
• An electrical supply 3~/N+PE, 400 V,50Hz must be provided.
The supply line must be protected with a time-lag fuse T16A (VDE0100 German regulation).
The minimum diameter amounts to 2.5 mm².
• All cable ducts must be equipped with protective coverings to prevent accidents.
9.2 Initiation
The Sprinter Mobil was checked by Nußbaum Company. Before the first
initiation the test must not additional take through by an expert.
9.3 Change the installation place
The automotive–lift is a flexible lifting device. It is possible to change the position of the lift only
without load.
Every solid and even surface is suitable as location. The location has to admit a load capacity
of 3000kg and also own weight of about 480kg.
The Sprinter Express II is quickly operational. The operating unit is moveable, too.
By changing the installation place, you must meet the preconditions according to the
recommendation.
Use new dowels, the old dowels cannot be used.