Operating Instruction and Documentation
2.30 SL E
- 11 -
5.3 Lifting the vehicle
• Lift the vehicle free. Check the position of the pads under the vehicle.
• Turn the changing switch in Position „
“ until the wheels are free. (see pic 2)
• If the wheels are free stop the lifting and check the sit of the pads again.
Check the pads under the vehicle again, otherwise the vehicle can fall down.
• Lift the vehicle on the working height.
The Lift can during the lifting depending on load repeatedly adjusting.
Check the fixing device of the arms. The device must lock.
pic. 2) the changing switch
5.4 Lowering the vehicle
•
Control the dangerous places of the lift and be sure that there are no objects or
people in the immediate area of the lift or on the lift.
•
Turn the changing switch in Position „
“ (see pic. 2)
•
Lower the lift at the height for working or until the carrying arms reach the
lowest position.
The Lift can during the lowering depending on load repeatedly adjusting.
• If the lift is in the lowest position turn the carrying arms to the outside (see D) ,
stop position (C).
C
the Starting point
D
if the lift is in the lowest position turn the carrying
arms to the stop position (starting point)
Summary of Contents for 2.30 SL E
