Nuova Simonelli PRONTOBAR, User Handbook Manual

Page: 53 / 182

51
EN
menu; the keys serve to increase/reduce
the time of the steam, if the AUTOSTEAM function
is activated, the keys serve to increase/
reduce the temperature.
Reading 000 corresponds to disabled key.
Press
ENTER to confirm settings.
Press RESET to quit the submenu.
4. SETTING
Pressing ENTER it is possible to enter the sub
menu and use the keys to select the func-
tion to be programmed.
Press
ENTER again to open the function.
4.1 COFFEE TEMPERATURE (Coffee boiler
temperature)
It is possible to programme the temperature of the
water in the coffee boiler.
Pressing
ENTER it is possible to enter the sub
menu; the keys are used to increase/
reduce the temperature of the water in the coffee
boiler tank (min. 80°C max. 100°C).
Press
ENTER to confirm settings. Press RESET
to quit the submenu.
4.2 STEAM TEMPERATURE (Steam boiler tem-
perature)
It is possible to programme the temperature of the
steam in the services boiler.
Pressing
ENTER it is possible to enter the sub
menu; the keys are used to increase/
reduce the temperature of the steam in the services
boiler tank (min 80°C max. 140°C).
Press
ENTER to confirm settings. Press RESET
to quit the submenu.
4.3 GROUP TEMPERATURE
(Temperature delivery group)
The temperature of the delivery group can be set.
By pressing the ENTER key the submenu
can be accessed; keys let you increase/
diminish the temperature of the water in the coffee
boiler (min.80°C max.100°C.) Press
ENTER to
confirm settings.
Press RESET
to exit submenu.
4.4 GRINDER SETTING
By pressing the ENTER key the submenu will
be accessed. A 0.1sec. increase in grinding times for
every 250 – 1000 deliveries can be set.
By placing the standard at 0, the function will be
disabled.
Keys
allow you to increase/dimin-
ish the amount of deliveries after which grinding
time will be increased. The selectable values are
0,250,500,750,1000.
Press the RESET key
to exit submenu and return
to the main menu with confirmation of the set value.
4.5 GROUNDS NUMBER (Grounds number)
It is possible to programme the number of cycles after
which it is necessary to empty out the dregs drawer.
Pressing ENTER it is possible to enter the sub
menu; the keys are used to increase/
decrease the number of the cycles (min. 0 counter
disabled, 1,2,3…100 - 150 - 200 - 400). Press
ENTER
to confirm settings. Press RESET to quit
the submenu.
To reset the cycle count for emptying the dregs
drawer, remove the drawer for at least 15 seconds.
4.7 WASHING BLOCK
it is possible to programme the number of beverages
before the machine enters block mode with the mes-
sage WASHING on the display. Pressing the ENTER
key, it is possible to enter the submenu; the
ĹĻ keys
serve to increase or reduce the number of cycles
(0-10-20-40-80-160-NO LIMIT); with 0 the machine
enters block mode immediately when the WASHING
alarm appears; with 10-20-40-80-160, the machine
enters block mode after 10-20-40-80-160 pours; with
NO LIMIT S the machine will not enter block mode.
Press ENTER to confirm the setting.