Nuova Simonelli APPIA II COMPACT, User Handbook Manual

Page: 50 / 146

4 5
EN
7 .9 AUTOMATIC GROUP
CLEANING CYCLE
To start the automatic cleaning mode, the machine
must first be switched off and then back on again
while holding down the hot water
and one low
coffee from group 2 during the initial Lamp-test.
At the end of the Flash-test, the and keys
and the single long coffee key of all groups will
begin to flash.
Press the key to start the washing cycle for the
relevant group.
Once the washing cycle has been completed, it is
possible to perform a rinse cycle for the same group
by pressing the
key again.
To perform the rinse cycle at a later time, switch off
the machine and the card will store any cleaning
cycles that need to be completed in its memory. In
fact, the next time that the machine is switched on,
the machine card will automatically open the group
cleaning status without it being necessary to press
the
and keys.
Hold down the and keys for 2 seconds to
exit the cleaning mode in the event that there are
no cycles to be completed. For incomplete cycles,
the
keys of the groups that require rinsing will
continue to flash.
Hold down the and keys for 2 seconds more
to force exit from the cleaning mode, resetting all
information about rinse cycles still to be completed.
When a cleaning cycle is complete, the key for
the group will switch off.
If there are no more rinse cycles to be performed, the
card will exit the cleaning mode.