43
COMPACT
EN
7.
PROGRAMMING
7.1
PROGRAMMING
DOSES
To access the programming units, proceed as fol-
lows:
NOTE:
the procedure can be carried out with the
machine on.
• To enter the programming function for each
group, it is necessary to hold down the continued
delivery key
for 5 seconds.
• The delivery keys will begin to flash.
• Accessing the programming mode for the first
group also enables the setting mode for the
machine's operating parameters.
7.2
PROGRAMMING
COFFEE DOSES
To programme the amount of water for each of the
delivery keys, proceed as follows:
• fill the filter holder with the right amount of coffee
(the double or single filter holder can be used,
according to the key to be programmed).
• Place the filter holder in the group.
• Press one of the delivery keys:
7.3
SETTING THE TIMED
STEAM FUNCTION
(Version with timed
steam nozzle without
temperature probe)
• Follow the standard procedure to enter the pro-
gramming function;
• Place the steam nozzle inside the liquid to be
heated;
• Press the steam select key
,
• The nozzle will begin to dispense steam;
• Press the steam key
again when a suf-
ficient amount of steam has been dispensed.
The machine will store this dispensing time to
memory.
• Press the continuous key
to quit the pro-
gramming function or to go on to program other
selection keys.
7.4
SETTING
THE
AUTOSTEAM FUNCTION
(Version with Autosteam)
• Follow the standard procedure to enter the pro-
gramming function;
• Place the steam nozzle complete with tempera-
ture probe inside the liquid to be heated;
• Press the steam select key
;
• The nozzle will begin to dispense steam;
• Press the steam key
again when the liquid
has reached the required temperature. The
machine will store this temperature setting to
memory;
• Press the continuous key
to quit the pro-
gramming function or to go on to program other
selection keys.
7.5
PROGRAMMING
HOT
WATER
• Use the relevant procedure to enter the program-
ming function.
• Press the hot water selection key
.
• Hot water delivery will begin.
• Decide the required amount of hot water and
then press the key
again.
• Press the continued key
to exit the pro-
gramming function or to continue programming
other selection keys.
• The machine will begin to dispense and once the
required quantity has been delivered, press the
continued key
.
• Delivery will cease and the selected dose key will
switch off (the other keys will continue to flash).
• Press the continued key
to exit the program-
ming function or to continue programming other
dose keys
NOTE:
This procedure can be used for all groups
on the machine, although it must be per-
formed on one group at a time; the other
groups will continue to operate as normal.
