background image

Fig. 24

1 small coffee

2 small coffees

1 long coffee

2 long coffees

Fig. 25

40

EN

COMPACT

6.

 USE

Before starting to use the appliance, the operator 

must be sure to have read and understood the safety 

prescriptions contained in this booklet.

6.1

 SWITCHING 

THE 

MACHINE ON

• Plug the machine into the mains power socket.

• Set the main switch (n.xx, Fig 1) to “I”. 

6.2

 SWITCHING 

THE 

MACHINE OFF

• Set the main switch (n. 13, Fig 1) to “O”. 

• Unplug the machine into the mains power socket.

6.3

 MAKING 

COFFEE

Unhitch the filter-holder and fill it with one or two 

doses of ground coffee depending on the filter used.

Press the coffee with the provided coffee presser, 

dust off any coffee residue from the rim of the filter 

(this way the rubber gasket will last longer).

Insert the filter in its unit.

Press the desired coffee button:

By starting up the coffee brewing procedure the 

unit’s pump is activated and the unit’s solenoid valve 

is opened.

By pressing it, the button will turn on and signal the 

operation

NOTE:

when in pause, leave the filter-holder 

inserted in the unit so that it will keep 

warm. To guarantee the utmost thermic 

stability during use, the delivery units are 

thermo-compensated with complete hot 

water circulation. 

Summary of Contents for Appia Compact

































Reviews: