Attaching Child Restraint
to PIPA RELX
™
Base
1
- After child is properly secured
in child restraint, lower child
restraint onto base and listen
for a click. Check that child
restraint is locked onto the base
by pulling up on the handle.
DO NOT
allow child restraint
or handle to contact the vehicle
interior (side of car door or seat in
front) when installed on base.
Recline Adjustment
PIPA RELX
™
features a recline
you can use on the go without
uninstalling the seat. Choose a
position that matches your child’s
weight and height.
Recline positions 1 & 2:
4–20 lb, up to 32 inches
Recline positions 3 & 4:
21–32 lb, up to 32 inches
2
- While firmly pushing the recline
button all the way down, slide
the top of the base. Release the
button; if the button does not pop
back up, the recline is not locked.
Gently push or pull the top of the
base until it locks into position.
(continued on the next page)
1
2
48 PIPA lite r instructions
49
PIPA lite r instructions
Summary of Contents for PIPA LITE R
Page 4: ...IM 000016F ...
