Smart Communication Module
16/24
6.
OPERATION OF THE SMART COMMUNICATION MODULE
Connect the Smart Communication Module (SCM) with an ACANTO length gauge to a power
supply. During operation, the SCM’s LED is permanently lit in blue. The SCM-1000 can then be
used directly via USB interface or via WiFi.
For a WiFi connection, the entered network settings (see Chapter 4) will be loaded
automatically.
• SCMs that are connected via a WLAN connection can be used by all output devices
(PC/tablet) in the network.
• SCMs that are integrated via the USB interface can only be used on the connected
terminal device.
The output values of the SCMs (SCM-data/ length gauge) can be read out via the SCA from
NUMERIK JENA GmbH or via alternative software.
Illustration 15: Schematic network illustration with several SCMs/end devices
Lokales Netzwerk/WLAN
(wireless) local area network
D24
59.65
48
