Smart Communication Module
13/24
5.4
Commissioning of the Smart Communication Module
Connect the Smart Communication Module to a power supply (length gauge
disconnected). The WiFi-hotspot is established automatically by the module, set up with
the factory settings (Please check section 5.1). During the commissioning the LED of the
SCM lights red.
Illustration 9: SCM with WLAN (LED lights up red)
Connect the SCM-1000 to your setup device directly via the USB interface or via WiFi.
For the WiFi connection, an access point is automatically established by the SCM-1000
with the factory settings (see Table 7).
Illustration 10: Schematic diagram for setting up the SCM (LED lights up red) via USB/WLAN
Table 7: Settings attributes (network connection and access data)
Lokales Netzwerk/WLAN
(wireless) local area network
D24
59.65
48
1
2
Lokales Netzwerk/WLAN
(wireless) local area network
D24
59.65
48
Setting
Value
WLAN - SSID
scm1000
WLAN - Password
12345678
Hostname
scm1000
Netzwerk IPv4 module
192.168.4.1/24
