Numark Audacity, Software Installation Manual

Page: 5 / 112

3
Audacity Software Installation
Before Starting the Software
Make sure that your USB turntable is plugged into the computer with the
supplied USB cable, and both the computer and the turntable are
plugged in and on. Refer to the USB turntable quick start instruction
manual included before proceeding with software installation.
REMOVE THE CLEAR PLASTIC CARTRIDGE (NEEDLE) COVER
For your first recording, we recommend that you perform a test on
about a minute or less of audio to become familiar with the process
before recording a full LP.
To Install Software (PC)
1. Plug in your turntable to an AC outlet and connect the USB port
on the USB turntable to the USB port of your computer.
2. Turn your computer on and allow it to boot fully if it is not on
already.
3. Turn on the power switch to your turntable.
4. Your computer will say that Windows detects a new device and
that it is available to use.
5. Insert the CD that came with your USB turntable.
6. Run the file “install audacity-win-1.2.3.exe”.
7. Optional: install SoundSoap 2 Demo by clicking on folder and
opening “setup.exe”
To Install Software (MAC)
1. Insert the included CD
2. Open the CD icon on the desktop.
3. Drag the installation folder for audacity to your hard drive. We
recommend that you move the folder to your “Applications”
folder.
4. A window will come up which shows the files copying.
5. EJECT the CD.
6. Optional: Install additional trial software included on the CD.