7
20. 05. 21. Document Number 671771
Nuaire |
Western Industrial Estate
|
Caerphilly
|
CF83 1NA
|
nuaire.co.uk
DRI-365
Installation Manual
6.0 MAINTENANCE
It is important that maintenance checks are recorded and that the
schedule is always adhered to, in all cases, the previous report should
be referred to.
Isolate from power supply before removing any covers. During
installation / maintenance ensure all covers are fitted before
switching on the mains supply.
The unit does not require any maintenance other than a filter change
and a check of electrical connections every 5 years
, failure to do so may
impair the performance and energy efficiency of this unit.
New filters
can be purchased direct from Nuaire using the following code:
•
777389
(5 year filter).
Dust can occasionally accumulate through static, on the diffuser and
the adjacent ceiling. This can be removed if required by vacuuming.
A clear distance of 500mm should be available above the unit to
allow access for maintenance.
6.1 Filter Replacement
Once every 5 years the filter requires replacement. To replace the filter:
•
Make sure the power to the unit is off.
•
Open the lid of the fan unit by removing the 5 screws which hold
the lid on.
•
Remove the filter.
•
Replace the filter.
•
Replace and secure the lid.
7.0 FAQ
While very rare, issues with newly installed units can occur. Typically
these issues can be easily solved by referring to the below table.
Symptom
Cause
Solution
Fan not
running.
NO power to the unit
(Display is NOT lit).
Ensure unit has not been
switched off or that the
local fuse has not blown.
Software error - Power to the
unit (Display is lit).
If electricity present, power
off, wait and power on
again – this may restart
the unit.
Fan failure - Power to the unit
(‘F’ is flashing on display).
Fan has failed and a
replacement unit is
required.
High loft temperature.
This is normal, see
temperature control
options.
8.0 WARRANTY
The 5
year warranty starts from the day of delivery and includes parts
and labour for the first year. The remaining period covers replacement
parts only.
This warranty is void if the equipment is modified without
authorisation, is incorrectly applied, misused, disassembled, or not
installed, commissioned and maintained in accordance with the details
contained in this manual and general good practice.
The product warranty applies to the UK mainland and in accordance
with Clause 14 of our Conditions of Sale. Customers purchasing from
outside of the UK should contact Nuaire International Sales office for
further details.
Failure to maintain the unit as recommended will invalidate the
warranty.
9.0 END-OF-LIFE AND RECYCLING
Ensure that Nuaire product is made safe from any electrical / water
/ refrigerant supplies before dismantling commences. This work
should only be undertaken by a qualified person in accordance with
local authority regulations and guidelines, taking into account all
site based risks.
Where possible Nuaire use components which can be largely recycled
when the product reaches its end-of-life:
•
Fans, motors, controls, actuators, cabling and other electrical
components can be segregated into WEEE recycling streams.
•
Sheet metal parts, aluminium extrusion, heating/cooling coils and
other metallic items can be segregated and fully recycled.
•
EPP, plastic ducting, nylon corner pieces, plastic heat exchangers,
packaging material and other plastic components can be
segregated into mixed plastic and widely recycled.
•
Cardboard packaging, wood, used filters and other paper
components can be largely recycled or fully processed in energy
from waste centres.
•
Remaining Items can be further segregated and processed in
accordance with the zero waste hierarchy. Please call After Sales
Support for further information on items not listed above.
10.0 AFTER SALES AND REPLACEMENT PARTS
For technical assistance or further product information, including spare
parts and replacement components, please contact the After Sales
Department.
If ordering spares please quote the serial number of the unit together
with the part number, if the part number is not known please give a full
description of the part required. The serial number will be found on the
identification plate attached to the unit casing.
Additionally a QR code linking directly to the Nuaire Ltd. website is
located behind the diffuser plate and can be used to order spare parts
and replacement components.
Telephone 02920 858 400
Technical or commercial considerations may, from time to time,
make it necessary to alter the design, performance and dimensions
of equipment and the right is reserved to make such changes without
prior notice.