Section 7
Service
Alpha Fuzion Sauna Body Pod
46
have two people lift the contour bed from the base chassis, as it may be
awkward to handle alone.
Figure 7.7.3 Disconnect Electrical Cords from Power Box Cover.
7.8 Replacing Bed Assembly Onto Base Chassis
•
Precautions:
1. Turn OFF main power switch located under contour bed on top of power box or
disconnect Alpha Fuzion Sauna Body Pod from power source before beginning
this procedure.
2. Two people may be needed to perform this procedure. Bed weighs approximately
60 lbs (27 kg), and may be awkward to handle alone.
•
Bed Assembly Replacement Steps:
1. Raise hood until it reaches fully-open position.
2. Set six (6) bed support balls in recesses in base chassis.
3. Gently set contour bed onto the six (6) bed support balls (balls should fit into bed
support cups on underside of bed).
4. Raise the head area of the bed. Locate black bed prop stand. Raise bed to allow
bed prop stand to be raised up and inserted into brackets (near upper vibration
motor) underneath bed as shown in Figure 7.7.1
Bed Stand Bracket
.
5. Lower contour bed onto bed prop stand as shown in Figure 7.7.2
Bed Assembly
from Base Chassis
.
Summary of Contents for Alpha Fuzion
Page 1: ...206507 NA AF 10 0813 2 U...