Section 7
Service
Alpha Fuzion Sauna Body Pod
36
7.3 Replacing the Heater Assembly
•
Precautions:
1. Turn OFF main power switch located under contour bed on top of power box, or
disconnect from main power source.
2. Two people are needed to perform parts of this procedure (hood removal). One
person can perform heater exchange.
•
Tools Required:
Adjustable wrench, ½ inch wrench, medium/large Phillips Head screwdriver
•
Preliminary Procedures:
1.
Prepare work area:
Place a large, soft, cushioned pad on the floor or an elevated
platform next to the Alpha Fuzion Sauna Body Pod for easier work access.
2.
Remove hood:
(See Section 7.1) Place exterior shell of the hood curved side
down
on cushioned pad
to prevent damage as shown in Figure 7.3.1
Upside
Down Hood Position
.
Figure 7.3.1 Upside Down Hood Position.
•
Removing the Heater Assembly:
1.
To release heater assembly from hinge plate
, use a Phillips Head screwdriver
or screw gun to release the heater assembly bracket by removing the center
screws and nuts positioned on each side of the strut opening. Place hand inside
opening, beneath bolt position, to catch nut as it releases.
CAUTION: Do not drop screws or nuts into heater channel of hood.
Summary of Contents for Alpha Fuzion
Page 1: ...206507 NA AF 10 0813 2 U...