background image

Contents/Precautions

11

Cautions on using 2.4 GHz devices

In the frequency  band used by WLAN devices, in 
addition to home electric appliances  such as a 
microwave oven and industrial/scientific/medical 
devices,  in-plant radio stations for identification of 
mobile objects used  in production lines of a factory 
(a license is required), specified  low power radio 
stations (a license is not required), or amateur radio  
stations (a license is required) can be in operation.
1. Before using this device, confirm that in-plant  

radio stations for identification of mobile objects, 
specified low  power radio stations or amateur 
radio stations are not in operation  in your 
neighborhood.

2. If this device generates harmful radio wave  

interference against in-plant radio stations for 
identification of  mobile objects, change the using 
frequency promptly or stop using  wireless LAN 
function, and contact "General Inquiries" on the 
last  page of this manual, then consult about 
treatment for prevention of  the interference (for 
example, installation of partitions etc.).

3. If this device generates harmful radio wave  

interference against in-plant radio stations for 
identification of  mobile objects or amateur radio 
stations, or if any trouble, contact  "General 
Inquiries" on the last page of this manual.

Cautions on using 5 GHz devices

Channel  numbers and frequency bands available in 
Japan are as follows.

5.2 GHz  band : 5,180 to 5,240 MHz (36, 38, 40, 42

*

44, 46, 48 Ch)

5.3 GHz  band : 5,260 to 5,320 MHz (52, 54, 56, 58

*

60, 62, 64 Ch)

5.6 GHz  band : 5,500 to 5,700 MHz (100, 102, 104, 
106

*

, 108, 110, 112, 116, 118, 120, 122

*

,  124, 126, 

128, 132, 134, 136, 140 Ch)

* Compatible  with IEEE802.11ac draft version. The 

terminal may not be able to communicate  with 
official-version-compatible devices to be launched in 
future  or draft-version-compatible devices from other 
companies. For compatible  products, refer to the 
following website.
http://www.fmworld.net/product/phone/wifi/

FeliCa reader/writer

FeliCa reader/writer function of the terminal uses 
weak waves requiring  no licenses for radio stations.

It uses 13.56 MHz frequency band. When using other 
reader/writers  in your surroundings, keep the 
terminal away sufficiently from them.  Before using 
the FeliCa reader/writer, confirm that there are no 
radio  stations using the same frequency band nearby.

CAUTION

Do not use a remodeled terminal. Using a remodeled 
terminal violates  the Radio Law/Telecommunications 
Business Act.

The terminal  is certified according to technical 
standard conformance of specified  wireless 
equipment based on the Radio Law/
Telecommunications Business  Act, and as a proof of 
it, the "Technical Compliance Mark 

" is depicted on 

the electronic nameplate  of the terminal.
If you remodel  the terminal by removing its screws, 
your certification of technical  standard conformance 
becomes invalid.
Do not use  the terminal with its certification of 
technical standard conformance  invalid as it violates 
the Radio Law/Telecommunications Business Act.

Be careful when you use the terminal while driving a 
car etc.

Using a mobile  phone while driving is subject to penal 
regulations.
However, absolutely  necessary cases such as rescue 
of a sick person or maintaining public's  safety are 
exempted.

Use the Bluetooth function only in Japan.

The Bluetooth  function of the terminal is compliant 
with wireless standards and  is authorized for use only 
in Japan.
If you use  this function overseas, you may be 
punished.

Use FeliCa reader/writer function only in Japan.

FeliCa reader/writer  function of the terminal conforms 
to Japanese radio standards.
If you use  this function overseas, you may be 
punished.

Do not alter the basic software.

Repairs  may be refused as a modification of software.

Summary of Contents for F-03K
























Reviews: