Before using the terminal
19
◆
Using touch panel
You can operate the terminal by directly touching with
your finger.
❖
Notes for using the touch panel
Touch panel is designed to be operated with your
fingertip. Do not apply excessive force on the touch
panel or use sharp objects (nail, ball point pen, pin, etc.).
･
Touching the touch panel may not work in the
following cases. Note that it may cause malfunction.
- Operation with gloved hands
- Operation with tip of fingernail
- Operation with a foreign object on the display
- Operation with protective sheet or seal on the display
- Operation with the touch panel wet
- Operation with finger wet by sweat or water
- Operation under water
❖
Touch
Touch lightly, then release the finger.
❖
Slide (Swipe)/Drag/Pan
Slide (Swipe) :
Touch the screen with your finger and
drag to the desired position.
･
For some screens, keeping touching the same point for
0.5 seconds or more fixes the scroll operation by slide
operation. Release your finger from the screen to
cancel the fix status.
Drag :
Touch an item etc. on the screen and move it to the
desired position.
Pan :
Drag the screen in some direction to view the
desired part.
❖
Pinch
Touch the screen with two fingers and widen (pinch-out)
or narrow (pinch-in) the fingers' distance.
❖
Flick
Touch the screen and sweep the finger quickly.
◆
Switching the portrait/landscape
view
The terminal supports a motion sensor that senses
orientation or motion of the terminal. You can switch
screen view by tilting the terminal vertically or
horizontally.
･
Even when you change the orientation of the terminal,
the screen may not change depending on the screen
displayed.
Basic operation
Ex
a
mple : Dr
a
g
