Chapter 6 - Maintenance
Replacing a DC Power Supply
70
3
Using your thumb, slide the power supply release latch while pulling the
power supply from the enclosure.
4
Remove the replacement power supply from the shipping container and
inspect for obvious damage. Save the packaging material.
5
Install the new power supply by sliding it into its open bay and ensuring it
seats completely and the release latch resets.
6
Re-connect the DC power cable. Insert the power cable connector into the
DC power cable module. It secures when the connector’s latches reset.
7
Turn the On/Off switch to the “On” position on the replacement power
supply.
NOTE:
The front bezel Power Supply Status LED will return to a normal
state (steady green).
8
Using the packaging material from the replacement power supply, repackage
and return the failed power supply per your RMA instructions.
4700S.book Page 70 Wednesday, April 6, 2005 2:14 PM
