Chapter 4 - Managing and Monitoring
Updating Controller Firmware
52
By pressing and holding down the <Enter> key, the controller will
automatically sense and set the baud rate during boot.
This process takes you to what is called the “Monitor mode.” Once in
Monitor mode (command prompt displayed), type “rs” and press <Enter>.
This will restart the controller using the corrected baud rate.
8
If the menu system does not automatically appear after the controller has
completed its boot cycle, at the screen cursor type <Control-E>. Then type
<Control-W> to switch the interface to the menu-based mode.
9
From the Main menu, select the
Diagnostics Menu
and press <Enter>.
Diagnostics Menu Screen
10
Use the <Up> and <Down> Arrow keys to select
Online Diagnostics
and
press <Enter>.
Online Diagnostics Menu Screen
4700S.book Page 52 Wednesday, April 6, 2005 2:14 PM
