nStor 4100FS, User Manual

Page: 52 / 168

Chapter 3 - Setup and Installation
Completing the Installation
40
Completing the Installation
1 Install the disk drives.
a Remove each drive from its shipping container and remove the anti-static
protective packaging. Inspect each drive for obvious damage.
b From the front of the storage enclosure, install each disk drive into its
drive slot.
Align the carrier rails with the rail grooves in the drive bay. The drive
carrier tension clips ensure that the disk drive fits very tight, so it requires
some force to push the drive into its bay. Ensure that the drive seats
completely. Repeat this step to populate all the drive slots.
Installing Disk Drives
c Re-install the front bezel. Ensure that the bezel mounts to the two stud
post and the bezel lip fits under the chassis top.
Secure the front bezel. Using a Phillips screwdriver, rotate the fasteners
clockwise one-quarter turn to secure the bezel locks.
2
Install the power cords and secure them using the power cord bales.
CAUTION: Ensure that the power supply On/Off switches are in their OFF
position.
4100FS.book Page 40 Tuesday, July 8, 2003 4:35 PM