10
1
2
3
3A
3B
3C
3D
4
5
7
6
8
20
10
11
12
13
14
15
16
17
18
19
9
Steering wheel with control and command panel
1. Control and command panel
2. Single brush unlocking pushbutton (available on single disc brush versions only)
3. Display,
showing:
•
3a = “Ready” (the machine is ready), or “Sit Down” (sit in the seat)
•
3b = Total working hours
•
3c = % of battery power status
•
3d = Battery power status in graphic scale
4. Adjustment buttons (+ and -) for detergent solution (or washing water) fl ow (*).
5. Light indicating the detergent solution (or washing water) fl ow.
6. Adjustment buttons (+ and -) for percentage of detergent depending on washing water fl ow (upon request) (*)
7. Light indicating the percentage of detergent (upon request).
8. “GREEN” pushbutton. Enable this function to minimize the amount of water and detergent, the brush rotation
speed and the vacuum power.
•
To disable the “GREEN” function, press and hold the pushbutton, then release it when initial settings are re-
stored on the panel.
•
When the “GREEN” function is enabled, press the button once to stop the brush and the vacuum functions.
9. Buzzer enable pushbutton.
10. Adjustment button for machine maximum speed; speed increases each time it is pressed (*).
11. Light indicating the machine instantaneous speed.
12. Disc brush lowering and rotation activating button.
13. Light indicating that disc brushes are enabled; it fl ashes when switching from disabled to enabled status and
vice versa.
14. Squeegee lowering recovery water suction button.
15. Light indicating that the squeegee and suction are enabled; it fl ashes during switch when switching from dis-
abled to enabled status and vice versa.
16. Pushbutton for simultaneous activation of both the squeegee and suction, and the disc brushes.
17. Light indicating that the squeegee, suction and disc brushes are enabled; it fl ashes when switching from dis-
abled to enabled status and vice versa.
18. Reverse gear enable button. The speed is halved compared to the forward drive. An acoustic warning sounds
when reversing. During reversing, the squeegee automatically lifts to avoid damage.
19. Light indicating that the reverse gear is enabled.
20. Light indicating that the “GREEN” function is enabled.
(*): Upon machine start-up with the key, these adjustments are reset to the values set previously
Summary of Contents for CHAMP 2417 RB
Page 2: ...2 NSS...
