NSR Marine NVR-3000 Operation And Installation Manual Download

Page: 61 / 105

NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL

NVR-3000 OM.E 20210412-02

Communicate by radiotelephone.

(7)

After you have completed communications, click

[OPTION]

, select

[Quit]

and click

YES

to Main screen.

(8)

You can also do the option:

[Hold]

or /

[Resend]

4.3.2.2 Receive a group call

Group MMSI must be registered in order to receive a group call. Refer to Section 2.10.

When a group call is received, the audio alarm sounds. The icon (

) appears in the tab area, and the pop-up

message "RECEIVED A DSC MESSAGE. GROUP" appears.

(1) Click

CLICK

to silence the audio alarm and erase the pop-up message.

The channel is automatically tuned to the received channel.

Summary of Contents for NVR-3000










































































































Search results

Summary of Contents for NVR-3000

Reviews:

Related manuals for NVR-3000

Brands by name

Popular brands

NSR Marine NVR-3000, Operation And Installation Manual

Search results

Summary of Contents for NVR-3000

Reviews:

Related manuals for NVR-3000

Brands by name

Popular brands